Melt-Away Foam Ceiling Tile 2 feet x 4 feet x 1 inch.
Melt-Away Foam Ceiling Tiles are specially made to melt out of a suspended ceiling grid system and approved for installation below automatic sprinkler systems. Melt-Away Ceiling Tiles are easy to install, simply lay in grid or drop in grid, trim with a sharp knife, clean with soap & water.
Melt-Away Foam Ceiling Tile 2 feet x 4 feet x 1 inch
Melt-Away Foam Ceiling Tiles are specially made to melt out of a suspended ceiling grid system. MELT AWAY-TILE is Factory Mutual approved for installation below an automatic sprinkler system. Just lay the 2 x 4-foot panel in the grid*. The tiles may be removed and cleaned with mild soap and water. They can be painted with a water based paint, but doing so will void the Factory Mutual approval.
MELT AWAY TILES are available in 1″ thickness and 2’x4’ and Sold by Cartons only, Minimum Order 2 cartons. Twelve (12) Tiles per carton covering 96 square feet per carton.
Long term service temperature of Melt Away TILE is 167° F. Care should be taken not to use this melt-away ceiling tile near heater vents, steam pipes, chimneys, or any other surface that has the potential of reaching 150° F or more. Melt Away Tile is manufactured from modified beads, Expanded Polystyrene (EPS) Board and should be considered combustible. Melt Away Tiles have a R 3.8 Rating, R-Value is the capacity of an insulating material to resist heat flow. The higher the R-value, the greater the insulating power.
24″ x 48″ x 1” MELT AWAY-TILE is packaged 12 pieces per box, Minimum Order 2 Cartons. Each carton contains 12 Melt Away Foam Ceiling Tiles covering 96 square feet per carton.
Large Orders of 24” x 48” x 1” is packaged 35 pieces per stretch-wrapped bundle or large for pallet shipment. Full Pallet Consist of 14 Cartons or 168 2×4 tiles covering 1,344 SF.
*Please note, 2’ x 4’ actual tile size is 1″ x 23-3/4″ x 47-3/4″, to fit in 2 x 4 grid
Call us at 888-612-7573 for more information or write us at [email protected]