AA204 Faux Black 24″x48″ Plastic Wall and Ceiling

$15.79$18.79

MODERN CEILING TILES CAN MAKE IMPROVEMENT TO YOUR OLD HOUSE OR ANY HOME. These tin styled panels replicate the look of metal panels.

Decorative Glue Up Plastic Ceiling Tiles, 24” x 48” x1/32” 

“Tin” styled thermoformed for crisp detail

24″ x 48″x 1/32” panels

Easy to Install

Class A fire rated

NCR of .35, unlike metal tiles that offer no noise reduction  

Leave white or paint to match your décor or select a factory color.

Tiles with overlapping edges can be glued to any Hard & Plain Surface with DAP Original Gel or Loctite Power Grab All Purpose Construction Adhesive. Tiles can be used in Homes, Offices, Hospitals, Schools, Hotels, Motels, Business complexes.

Minimum Order Box of 10 tile panels can add single tiles after minimum met.

Time to get started purchase from our web store or call 888-612-7573 or write is at [email protected]

Clear

Easily and Simply Cut with scissors. Available in multiple factory colors consisting of Aged Copper, Black, Bronze, Copper, Nickel or White. Easy to Glue Up, even over existing Popcorn Ceiling. We recommend Loctite All Purpose Construction Adhesive, which is readily available at local hardware store.

These tin styled panels replicate the look of metal panels. You can’t tell they’re not metal! Clearer and crisper detail (vs stamped metal) is achieved in these 2’x4′ faux tiles in 1/32″ thick durable matte white & solid colored styrene. Eco-friendly & Made in USA.

Each 2×4 panel overlaps the next with no visible seam, actual panel size is 24.5” x 48.5”, to allow for the overlap. Our dot dash area allows our panels to install properly and imitate metal panels creating a more authentic look. Other brands do not have this feature or charge extra for trim strips. The1/32” thick styrene is quite durable but easily cut with a sharp knife, box cutter or pair of scissors.

Panels will not absorb moisture nor rust etc.

You Can’t tell they are not metal once installed. Clearer and crisper detail vs stamped metal is achieved in these 2’x4’ faux tiles by thermoforming thick 1/31” durable & rigid matte white & solid colored styrene. Be aware that another brand uses thin cheap material. While you can tell its plastic in your hand, once installed you’ll be in disbelief it isn’t the real thing.

Class A fire resistant. Made in USA!

Inexpensively Paint to Color Desired. To match your décor or leave matte white and install without painting, or select a factory painted color. This can be achieved to create a unique and stunning two-tone finish by simply painting over our solid colors and with a cloth rub off the high spots. Easily spray paint or roll-on (1/2” nap) any of our styrene panels with latex paint+primer all in one or oil based paint.  Other products don’t accept a paint as well as ours and can be much more difficult to work with.

For Soundproofing effect, our Faux Tin Looking Ceiling Tiles can be Acoustical! Achieve an acoustical absorption up to a NRC .55 by gluing the tiles to perforated board with insulation above. Unlike Metal tin tiles which can make the room much louder, our Styrene Panels allow sound to pass through them. Depending on the surface installed on, this can equate to a dramatic difference in ambient and reverberant noise!

Create a Great DIY Project as the possibilities are limited only by imagination!

Time to get started purchase from our web store or call 888-612-7573 or write is at [email protected]

Minimum Order Box of 10 tile can add single tiles after minimum met.

Weight 2.5 lbs
Dimensions 24 × 48 × 2 in
COLOR

, , , , ,

Model

SKU00862

There are no reviews yet.

Be the first to review “AA204 Faux Black 24″x48″ Plastic Wall and Ceiling”

Your email address will not be published. Required fields are marked *

Updating…
  • No products in the cart.