Pattern 6″ x 6″
CREATE A BEAUTIFUL CEILING IN A VERY ECONOMICAL MANNER
CREATE A BEAUTIFUL CEILING IN A VERY ECONOMICAL MANNER This classic 6″ x 6″ repeating pattern is available in over 100 dazzling finishes. Lay-in panels are specially sized to fit into any standard 15/16” suspended grid system. Simply drop the panel into an existing or new grid to create a truly dramatic ceiling effect. Matching grid strips and cuffs are available in any Ceilingtilesbyus.Inc. finish. ALUMINUM… WILL NEVER RUST! NO SHARP EDGES SIZED FOR ONE PERSON INSTALL
Tinplate efficiently combines the strength of steel with tin’s luster, corrosion resistance and low toxicity. Most Tin Ceiling Tiles are tin-plated meaning they are made from sheet metal, thin coated with tin and in all likely hood will require painting. Another type of Metal Ceiling Tiles are those made from Unfinished Aluminum. Ceiling Tiles made of Aluminum (unlike raw tin-plated steel ceiling tiles) will not rust. Steel will rust even if coated with tin plating whereas Aluminum will never rust. As with any unfinished Metal Ceiling Tiles they require painting. There are many Metallic Paints on the market and to purchase these beautiful Metallic Paints in for example Copper or Silver is very expensive and cost around $150.00 per gallon of paint.
Mill finish tin ceiling tiles from Ceiling Tiles By Us Inc provides a raw aluminum finish for that tin ceiling artist in you! Use your Mill tin ceiling panels in an room of the house without worry of heat or humidity, as raw aluminum tin ceiling panels (unlike raw tin-plated steel products)will not rust. Mill tin ceiling panels from Ceiling Tiles By Us Inc come with standard, straight from the tin ceiling manufacture feel, and must be painted with any direct to metal paint. Mill tin ceiling tiles will oxidize after time, and care should be taken to avoid this if the oxidized look is not what you are going after. To view all amazing finishes.
Authentic tin ceilings of yesteryear were made from tin-plated steel. Ceiling Tiles By Us Inc. offers tin-plated panels just like the originals. These panels provide tremendous value and are lower in cost than Ceiling Tiles By Us Inc aluminum and solid copper panels. However, tin-plated steel, like the original, could rust over time if exposed to water and/or humid conditions. Tin-plated steel panels also have sharp edges so it is recommended that installers wear protective gloves when handling.
Traditional finish of White and Clear Coated tin ceiling tile finishes allow tin ceiling panels to be installed without painting. The Clear Coated tin ceiling finish provides a shiny metallic look that will last for years. The White tin ceiling tile finish provides a clean, crisp (matte) appearance that can be used as is, or as a primer base ready for top coating with any latex paint. Mill finishes tin ceiling tiles (in aluminum) and tin-plated metal ceiling tiles, while economical, require a coating before or after installation. View a list of all our available tin ceiling panel finishes.
The Premium Tin Ceiling finishes from Ceiling Tiles By Us Inc Tin Ceilings are created using a proprietary process that results in a dramatic two-toned or variegated finish. Each Premium tin ceiling panel finish provides an almost hand-applied look that uniquely enhances each embossed tin ceiling pattern. Premium tin ceiling tile finishes do not require additional coating prior to, or following installation. To assure the look is just right for you, Ceiling Tiles By Us Inc Tin Ceilings recommends that you order a full-size Premium Tin Ceiling Panel sample prior to placing a full order. View a list of all our available tin ceiling tile finishes.
Solid copper panels provide an expensive, sophisticated look to any room where they are installed. Since these panels are shipped without a coating, these panels will age over time taking on the rich patina of aged copper. The aging process happens slowly and it can be stopped at any time during the process. Once the copper has attained the desired look and appearance, applying a clear lacquer or latex topcoat will stop the aging process. This topcoat can be purchased at any local or national paint retailer. When handling a solid copper panel it is recommended that installers wear soft cotton gloves so as not to mar the finish with oil deposits during the installation process.
The Artisan tin ceiling finished tiles are created and then hand applied by individual artists yielding a rich and refined custom tin ceiling finish that is truly unique and distinctive. Artisan finished Tin Ceiling Panels do not require additional coating prior to, or following installation. To assure the look is just right for you, Ceiling Tiles By Us Inc. recommends ordering full-size Artisan Finish Tin Ceiling Panel samples prior to placing a full order. View a list of all our available Tin Ceiling Tile finishes.
Aged Soloid Copper, Amethyst, Antique Brass, Antique Brass Clear, Antique Brass-Copper, Antique Gold, Antique Pewter, Arctic Frost, Atheian Bronze, Auqua Green, Belle of Hope, Black Cherry, Black Satin, Brandy, Brushed Putty, Buff, Burnt Mahogony, Clear Coated, Crackled Ivory, Crackled White, Creme Brulee, Distressed Sage, Dove Gray, Emerald, Flaxen, Mahoganie Clear , Marbal, Merlot, Midnight, Mill Finish, Molten Gold, Molten Silver, Palomino, Polished Brass, Polished copper, Sage, Tin Plated Steel, White