Our PVC Ceiling Tiles Installation and Information Page contains extensive Product Data. We will cover the various methods to install the product to acquire a beautiful ceiling.
Any Plain Color Shade. Combination Colors. Antique Process is Hand Painted & will vary in shades as different lots are prepared by different people and the spreading & wiping process will vary in shades. Production Methods are applied to try and avoid varying Antique Shades but lighter & darker colors do occur, so it is very good idea to order plenty of tiles for the project. The reason is the next order for a few tiles may create a match problem. All the Designs Are Available In All The Colors. Please refer the Color Range on each Product Page for complete details about the color and effects.
PVC Ceiling Tile are in fact Fire Rated but the Customer must be aware there may be codes applicable in the area you are located that need your attention before your purchase and installation of products. The Customer needs to be aware or become informed of what may be applicable in your local area. We do not warrant nor guarantee that our Fire Ratings are acceptable to Inspectors in all Towns, Cities, Counties or States in which you the customer are located or location you wish to install and use the product. It is the Customer’s Responsibility to check within your local area to determine what particular codes, rules or regulations may apply to the particular use you may have for the product application. Refer to Local Building Codes as they may vary from that contained are referenced in the International Code Council.
The Ceiling Tiles By Us PVC Decorative Ceiling System are manufactured from High Quality Polyvinyl Chloride Sheets. It is dimensionally embossed to create three dimensions effect, and the grater artwork is created with various colors & effects. The combination of the above result in an extra ordinary and incomparable outlooks and appearance.
The PVC Ceiling Tiles are available in the size of 24″x 24″ it is available in 40+ Beautiful designs, almost in any color shade or combination
of 2 or more colors available. The effect like wooden grains, Metallic (Gold, Silver, Copper etc.), Pearl shine etc. which make it
stylish and aesthetic.
The PVC can be fixed on any Hard & Plain Surface with any good quality rubber base adhesive. They can be used in Homes, Offices,
Hospitals, Schools, Hotels, Motels, Business complexes, etc. As they are very economical & having the best quality.
Our PVC Ceiling Tiles are available in approximately 40 plus different designs
and approximately 30 different colors and even more with various color combinations and can be installed in multiple applications.
If you want to add your special touch in our products, we welcome your suggestions /requirements. Customization is possible
on all these specifications.
Just follow these 4 simple steps to install / paste the Ceiling Tiles By Us 24″ x 24″ or 24″ x 48″ Overlapping Edge Decorative Ceiling System.
It is really quick and easy to glue up PVC Faux Ceiling Tiles.
1. Wipe off the ceiling / surface and make it smooth and even. Remove loose plaster, paint, wall paper, dust oil etc.
2. Center the room for starting point of pasting in center in right quadrant to achieve equal sides. Use chalk lines to center room, consider the option to center through light or electrical fixtures. Start from corner. Draw straight lines in the corner (in width and length parts) and make a 90 degree angle for starting point of pasting. First sheet at the 90 degree point.
3. We suggest Loctite All Purpose Construction Adhesive or any good quality Contact Cement, rubber or urethane base adhesive such as DAP, Wellwood Original Formula. Apply to back of Ceiling Tile on the edges and raised crossed section of the sheet and follow adhesive manufacturer’s instructions. With Contact Cement let it be dry till the solvent of adhesive evaporates. Please check the drying time on the pack of the adhesive, usually it is anywhere between 2 to 6 minutes. It is suggested to apply the adhesive on the ceiling also for better bonding and strength.
Approximately, 1 gallon of adhesive will require to cover 75 tiles or 300 square feet, if you apply on both, the tiles and the ceiling. We always recommend that all customers always test your application and allow it to rest at least 24 hours to evaluate the process and make an informed decision as the application process that is right for your scenario. We also recommend a clean dry surface and to use a Premium quality, brush grade, neoprene-based contact cement that meets the stringent requirements of the professional user. High strength and initial grab make it ideal for most projects. Fast-drying formula dries in 15-20 minutes. Offers high heat and water resistance when dry.
4. Place the sheet in the required position and press firmly but gently overlap the ends of the previous sheet and press firmly with finger tips.
This video is supplied by Hotel 98, 101 Wood Street, Whitehorse, Yukon, Canada Y1A 1G0 using an adhesive similar to Locite All Purpose Construction Adhesive.
Please do not throw out those old Acoustical Ceiling Tiles.
PVC CEILING TILES INSTALLATION IN GRID CEILING IN HOME BASEMENT BY BABY LOVING MAMA.
PVC CEILING TILES INSTALLATION IN GRID CEILING BENEATH EXISTING ACOUSTICAL CEILING TILES IN RESTAURANT.
MEASURE AND CUT PVC CEILING TILES AS NEEDED TO FIT WITH SHARP BOX CUTTER OR REGULAR SCISSORS.
WITH PVC CEILING TILES INSTALLATION THE POSSIBILITIES ARE LIMITLESS. IMAGINATION IS THE ONLY LIMITATION!
The PVC products are extremely durable and they have a very long life.
You can Wash all the products with water and mild soap, you can use vacuum cleaner, blower, etc. to clean and maintain the products. So, it is very easy and quick to maintain the PVC the products.
As the PVC products are coated with specialty coatings, they are Scratch resistant, and UV (ultra violet) resistant so, there will be no effect on color from direct sunlight and scratches. So, the color will remain the same for a very long time.
YES, it can be painted after installation. You just have to use any Plastic Paint or use a Spray, to recolor your favorite shade. Please note, the new shade should be darker than the existing shade, for better results.
These PVC products are light but weight can vary significantly depending upon the product variation and we suggest you contact us to discuss your intended application. Call 888-612-7573 or e-mail you question to us at [email protected]
All the PVC products are very easy to cut according to the installation needs. They can be cut with Scissors, except Cornice & Borders, to cut them hack saw (with the smallest teeth) should be used.
7. Can the consumer combine two products / designs while installing?
YES, The consumer can use the designs according to their imagination, as our products are designed in a consumer friendly manner and to provide maximum solution in helping you to create endless possibilities. The consumer can combine any design of any of our PVC products or the consumer can also combine our different PVC products for a particular area of decoration. As an example the consumer can combine Door Skins and Cornice & Borders, Decorative Ceiling System and Cornice & Borders, Decorative Ceiling System and Door Skins etc.
Through any Rubber Adhesive the PVC products can be pasted on any hard and plain surface. the approximate quantity to paste the products are as follows:
As to amount of glue apply in sufficient quantity to allow uniform adhesion of all areas.
The PVC products Class A Fire Rated and are non flammable, i.e. it won’t support fire and it won’t catch flame. But it will damage itself in case of fire like all other materials such as cloth, plastics, wood and metal.
YES. All the PVC products are environment friendly and it can be recycled.
NO. We use high quality virgin PVC sheets so, it is not harmful to any one in any aspect.
As the products are made from high quality PVC most any environmental condition will not effect them. From extreme cold to hot from dry to wet, any weather condition can not effect the products.
The products are designed in such a way to resist day to day blow and strokes, so, it won’t break easily.
YES, as the company is highly integrated and having all the facilities and departments, the company can manufacture Custom Designs, Colors, Sizes, Effects etc.
That depends on the quantity ordered. The company can deliver any quantity ordered through Post, Courier, Road cargo, Air cargo, Sea cargo etc. which is cheaper and effective.
We recommend to fill the embossed part of Plain (only PVC, no, plywood or flush door) Door Skins, with Plaster of Paris before installation. It will increase the strength and life of the Door Skins and will be able to resist harder strokes and blows. It can be filled by a simple cone filled with wet Plaster Of Paris and let it be dry for a while.
Please see the two Videos below, both Part I & Part II for more Product Installation Demonstration of our PVC Ceiling Tiles with overlapping edges to smooth clean surface.
Customer recommend Loctite All Purpose Construction Adhesive also works very well.
We recommend Loctite All Purpose Construction Adhesive also works very well.
INSTALLATION VIDEO OF PVC SHEETS APPLIED WITH GLUE TO EXISTING GRID OR ACOUSTICAL CEILING TILE. THIS IS BECAUSE INSTALLATION PROCESS INITIATED WITH ORIGINAL APPLICATION OF GLUE UP ONLY DESIGNS OF PVC CEILING TILES BEING INSTALLED IN A GRID. THE REASON IS BECAUSE THESE GLUE UP ONLY (NOT TO BE CONFUSED WITH GRID SUSPENDED PVC CEILING TILES WHICH WILL FIT INTO A GRID SUSPENDED CEILING SYSTEM AND WERE PRODUCED LATER AS NEED DEVELOPED). THE PROPERTY OWNER CAN INSTALL PVC CEILING TILES BY GLUING TO SMOOTH CLEAN SURFACE WITH OVERLAPPING EDGES.
ORIGINALLY THE MANUFACTURER ONLY PRODUCED GLUE UP ONLY PVC CEILING TILES AND THEY WERE NOT MADE FOR GRID INSTALLATION AND WILL SAG SOME. THE FACTORY DEVELOPED THIS INSTALLATION PROCESS TO ALLOWS THESE GLUE UP ONLY PVC CEILING TILES TO BE INSTALLED IN A GRID SUSPENDED CEILING, SHOULD THE CUSTOMER DESIRE THIS DESIGN. SHOULD CUSTOMER HAVE NO EXISTING ACOUSTICAL CEILING TILES THE BACK SUPPORT CAN BE THIN PLYWOOD OR LUANN BOARD CUT TO TO GRID.